Epoxy flooring
A seamless epoxy floor, poured over the one you have.
Epoxy is a poured resin coating that cures into one continuous, easy-to-wipe surface. In most cases we apply it over sound existing tiles or screed, with no hacking. Choose a calm solid colour, a textured flake finish, or a metallic marble effect, in gloss, matt, or with added grip for wet areas.
Where epoxy suits.
A poured resin floor for hard-working rooms at home and at work, in HDB and condo flats, landed homes and shops.
- Kitchens
- Service yards
- Car porches
- Sheltered balconies
- Garages
- Shops and showrooms
- Toilets, with an anti-slip finish
Four epoxy offerings.
-
Self-levelling epoxy
A smooth, even, joint-free surface for kitchens, service areas, offices and showrooms.
From S$6/sq ft
-
Solid-colour epoxy
An even tone in gloss or matt, for utility rooms and calm home floors.
From S$4/sq ft
-
Flake (chip) epoxy
A speckled texture with more grip, for wet kitchens, garages, car porches and toilets with anti-slip.
From S$6/sq ft
-
Metallic epoxy
A hand-worked marble or swirl feature floor for living areas, shops and showrooms, where every pour is unique.
From S$15/sq ft
Finish pictures are design visualisations, not photos of finished jobs.
Gloss, matt or anti-slip.
- GlossA reflective sheen, suited to dry interiors.
- MattA soft, low-sheen surface.
- Anti-slipGrip in the topcoat for kitchens, toilets, yards and porches.
How an epoxy floor is done.
- 01
Assess
We look at the substrate, the falls, any moisture, and how the room is used.
- 02
Prepare
We clean, repair and key the surface so the coating can bond.
- 03
Prime
A primer prepares the floor for the system you’ve chosen.
- 04
Apply
We apply the chosen system — self-levelling, solid colour, flake or metallic.
- 05
Topcoat, cure and handover
We confirm on your job when the floor can take foot traffic, furniture and everyday use.
How epoxy sits with vinyl and microcement.
Vinyl remains the natural choice for living rooms and bedrooms that want a wood-look plank. Microcement is the choice when you want one mineral colour across floor and walls, especially in toilets. Epoxy is the poured resin option for kitchens, yards, porches and commercial floors that want a seamless, wipe-clean surface.
Not sure? WhatsApp 2–3 photos and we’ll recommend the right finish for each room.
Good questions about epoxy.
Can epoxy go over my existing tiles?
Yes in most cases, if they’re sound and firmly bonded. We prepare the surface and overlay it, so there’s usually no hacking. If tiles are loose or hollow, or there’s damp, we tell you before work starts.
Where does it suit?
Kitchens, service yards, car porches, sheltered balconies, garages, shops and showrooms, and toilets with an anti-slip finish. It suits HDB and condo homes, landed houses and commercial spaces.
Does epoxy peel?
Peeling usually comes from poor preparation. We check the existing floor, prepare the surface and use a primer before the coats go down. If something isn’t suitable, we tell you before work starts.
Is it slippery?
For kitchens, toilets, yards and porches we can add grip in the topcoat. You can also choose a gloss or matt finish for dry interiors. We’ll recommend a finish for your room when we see the photos.
Microcement or epoxy for my toilet?
Both are considered options, and we don’t talk down either. Microcement gives a soft mineral look and can run the same colour from floor to wall. Epoxy is a poured resin floor; for toilets we recommend an anti-slip finish. Send 2–3 photos and we’ll recommend the right finish for your space.
How long before I can use the room?
Timing depends on the room and the system. We confirm on your job when the floor can take foot traffic, furniture and everyday use, including when you can shower if it’s a toilet.
Does epoxy waterproof the room?
It seals the surface and grout lines, so the floor is easy to clean. It is not a waterproofing membrane. If there is an existing leak, we’ll tell you first.
Send 2–3 photos and the rough size.
We’ll come back with a fixed, all-in price. Free, no obligation.